Sunday, 8 March 2015
[Guide]Flash a rom with odin
Note:Odin is mainly made for samsung device only.
In this post we will tell you how to flash a rom in android phone using odin.
For this you must know how to open Download mode in your android phone.Download mode is a special mode where the partitions are flashed into your android phone.It's normaly accessible by pressing the three-way button combinationPower + Home + Volumedown at the same time when turning on your device.Mainly for every android phone the keys will remain same but if your phone doesn't open download mode by using this buttons then search on google (how to open download mode in your device name).
Download mode looks similar to this:
5. Depending on what you're flashing, take it to the corresponding box (PDA: Roms, Kernels, Bootloaders) (Modem: Radio/Baseband) (CSC: Csc file)
6. When you're clear with this, be sure to check throughously that the file is intended for your device.
7. If a .pit file was selected when trying to flash, ensure that re-partition at the left is UNCHECKED!! (Unless if it's going back to the stock Samsung firmware)
8. Press the flash button
9. It should go through the flashing, you should see the partitions that's being flashed into device during this time.
Note: DO NOT unplug the cable while flashing
10. When everything is finished, the program should ouput that it's done with a green box and your device should reboot automatically.
In this post we will tell you how to flash a rom in android phone using odin.
For this you must know how to open Download mode in your android phone.Download mode is a special mode where the partitions are flashed into your android phone.It's normaly accessible by pressing the three-way button combinationPower + Home + Volumedown at the same time when turning on your device.Mainly for every android phone the keys will remain same but if your phone doesn't open download mode by using this buttons then search on google (how to open download mode in your device name).
Download mode looks similar to this:
Now, You know how to enter into download mode for your device.So,lets go forward.
You must have odin installed into your laptop or pc.If you doesn't have odin then download it from http://odindownload.com/ or any another website.After download install it.
Now,You need the usb drivers for your device.Download it from
or search on google for your device.
Now,Let's start the method of flashing.
1.Connect your android phone with laptop or pc using data cable.
2.Open Odin in pc.
3. Put your device into download mode. The result should be like shown in above picture.Press volume up to bypassed the warning.
4. You should see a yellow rectangle with COM:xx and saying ready. It means that your device is ready to be flashed!5. Depending on what you're flashing, take it to the corresponding box (PDA: Roms, Kernels, Bootloaders) (Modem: Radio/Baseband) (CSC: Csc file)
6. When you're clear with this, be sure to check throughously that the file is intended for your device.
7. If a .pit file was selected when trying to flash, ensure that re-partition at the left is UNCHECKED!! (Unless if it's going back to the stock Samsung firmware)
8. Press the flash button
9. It should go through the flashing, you should see the partitions that's being flashed into device during this time.
Note: DO NOT unplug the cable while flashing
10. When everything is finished, the program should ouput that it's done with a green box and your device should reboot automatically.
Subscribe to:
Post Comments
(
Atom
)
No comments :
Post a Comment